19 Deals Of 3D Printers to Explore from Creality, Anycubic, Bambu Lab & More

The Comgrow Ender 3 is presented as a DIY printer with several parts already assembled. Its resume function is intended to continue a print after a power outage or interruption. The listing also describes an upgraded extruder and V-slot movement components, along with a hot bed that reaches 110°C in about five minutes. Assembly is estimated at around two hours in the supplied product information.

This WOL 3D listing pairs the Creality Ender 3 DIY printer with white PLA PRO+ filament. The product information gives a 220 × 220 × 250 mm build volume and describes a power-recovery feature for continuing interrupted prints. PLA, PETG and TPU are named in the listing as filament types for printing, and assembly is positioned for makers who want a build-it-yourself setup.

The Anycubic Kobra 2 Neo listing combines a stated maximum print speed of 250 mm/s with a recommended speed of 150 mm/s. LeviQ 2.0 automatic leveling includes Z-offset compensation, while the integrated extrusion and cooling system is described with a 60 W hot end and a 7,000 rpm fan. The 220 × 220 × 250 mm build volume is specified for this FDM model.

This Kobra 2 Neo listing specifies FDM printing, a 220 × 220 × 250 mm build volume and a 250 mm/s print speed. It also lists automatic calibration, a heated print bed and a 0.4 mm nozzle. The supplied connectivity details include USB, Wi-Fi and Ethernet; check the listing for the current product and bundle information.

The Anycubic Kobra 2 Neo is described here as an FDM printer with a 250 mm/s maximum speed and a 150 mm/s recommended speed. Its LeviQ 2.0 system handles automatic leveling and Z-offset compensation. The listing also describes an integrated extrusion system, a 60 W hot end and a 7,000 rpm cooling fan. It gives one-year service information, with separate periods stated for the print head and heated bed.

The Creality Ender 3 V3 SE listing highlights a 250 mm/s maximum print speed and CR Touch automatic leveling, paired with a strain sensor for Z-offset compensation. Its Sprite direct extruder is listed for PLA, PETG and TPU. The product information also describes dual Z-axis components, automatic filament loading and unloading, and an assembly process of about 20 minutes in three steps.

The Creality CR-10 SE listing combines a 220 × 220 × 265 mm build volume with a stated maximum speed of 600 mm/s. Automatic leveling uses a CR Touch and strain sensor, while linear rails are specified on the X and Y axes. Other listed details include a Sprite direct-drive extruder, a hardened steel nozzle and a 4.3-inch screen.

This Ender 3 V3 SE listing gives a print size of 8.66 × 8.66 × 9.84 inches, approximately 220 × 220 × 250 mm. It specifies a maximum print speed of 250 mm/s and automatic leveling through CR Touch, with a strain sensor for Z-offset adjustment. The Sprite direct extruder and dual Z-axis are among the other named features, and the listing describes assembly in three steps.

The Anycubic Photon Mono 4 uses stereolithography, rather than the FDM technology identified for several other printers on this page. Its listed build volume is 153.4 × 87 × 165 mm, and the product details call out a 10K-resolution feature, a 7-inch screen and USB connectivity. The listing says it supports SD cards and does not have auto calibration.

The Bambu Lab A1 mini listing describes full automatic calibration, including bed leveling, Z-offset, vibration compensation and nozzle calibration. Active flow-rate compensation is intended to adjust extrusion during printing. The supplied product details give a 256 × 256 × 256 mm build volume and noise of up to 48 dB, and note compatibility with the Bambu Lab AMS Lite for multicolor printing.

The Bambu Lab A1 is listed with a 256 × 256 × 256 mm build volume and full automatic calibration for each print job. The stated calibration functions include Z-offset, bed leveling, vibration resonance and nozzle pressure. The product information also describes print-status monitoring and offers cloud connectivity or a LAN-only connection mode.

The Anycubic Kobra X listing focuses on high-speed printing and built-in four-color capability. Its title gives a maximum speed of 600 mm/s, but the supplied feature details do not provide further technical specifications. The build-volume text in the title uses an unclear unit, so a build volume is not listed here.

The Flashforge AD5X is presented as a multicolor, multi-material printer with an Intelligent Filament System that supports four-color printing. Its 220 × 220 × 220 mm build volume is paired with a listed travel speed of up to 600 mm/s and 20 m/s² acceleration. Other named functions include one-click auto-leveling, vibration compensation, filament detection and automatic filament loading and unloading.

The Creality SPARKX i7 Combo is listed with CFS Lite for multicolor printing and a 260 × 260 × 255 mm build volume. Its product information describes one-tap pre-print calibration, including bed leveling, nozzle Z-offset and input shaping. A built-in camera is described as monitoring for print issues, while the listing also mentions customizable RGB lighting and portrait-to-model tools.

The Anycubic Kobra S1 Combo listing specifies FDM printing, a heated bed and a 250 × 250 × 250 mm build volume. It gives a print speed of 600 mm/s and lists auto calibration. The supplied product details also name a 0.4 mm nozzle and PLA filament; they do not provide further information about the Combo configuration.

The Bambu Lab P1S Combo is listed as a fully enclosed FDM printer with a CoreXY motion system and a 256 × 256 × 256 mm build volume. The supplied specifications include auto bed leveling, vibration compensation, flow calibration and a built-in camera. The box contents list an AMS, while the product details also note Wi-Fi connectivity and remote monitoring.

The Elegoo Saturn 4 Ultra 16K is identified as a stereolithography printer, placing it among the resin-based technology listings on this page. Its product details list auto calibration, SD card support and a 150 mm/s print speed. The supplied build-volume entry does not state units, so it is not converted or presented as a standard volume measurement here.

The Bambu Lab P2S Combo listing identifies FDM printing, a heated bed and a 600 mm/s print speed. It also lists one extruder head and a 0.4 mm nozzle, while auto calibration is marked as absent. The supplied build-volume value does not state a unit, so it is omitted from the normalized specifications.

The Bambu Lab X2D product information lists FDM printing, a 256 × 256 × 260 mm build volume and two extruder heads. It gives a print speed of 1,000 mm/s and lists automatic calibration. The supplied filament details name PLA, ABS and PET, alongside a 0.4 mm nozzle and 1.75 mm filament diameter.